Special-Clean.com has involved with the analysis of
mold and pollutants in inner rooms since 20 years. Since this time, we pay special attention to the cause research and the health-wise unproblematic removal of
mold and pollutants from surfaces and from the spatial air.
In the past, we often executed so-called free measurements after regular
"mold remediation". Due to the applied remediation techniques, the results were sometimes fatal. Massive
mold contamination was (and still is) e.g. scraped, brushed, wiped off, sprayed or misted with questionable chemicals, or even sanded in inhabited inner rooms without additional dust protection. The final results of the spatial air measurements after such treatments often signalize higher
spore concentration of mould in the breathed air than before the remediation measurements.
This was the reason for
Messtechnik Gummerum more than 10 years ago to develop a functional remediation measurement for
mold contamination in inner rooms. As a successful result, we could shortly after present our dynamic inner room cleaning method for microbiological contamination.
The
company special-clean.com was found.
The success of our dynamic inner room cleaning method for microbiological contamination - also called
D-MIR® - is based on the safe removal of partially high spore contamination in the spatial air as well as of the surfaces contaminated by
mold in one work-step from the beginning of the remediation. During this, possibly germinating as well as already dead spores are removed properly. Disinfection substances, which can cause health risks or permanent odor problems, we do not use. Our method therefore corresponds with the
current press information from the Federal Office for Environment Protection. Further advantages of our method are that the costly demolition of mould contaminated materials can be avoided in many cases, and the complicated installation of dust protection is often not necessary.
